Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!I recently created a new VLAN for devices to connect to. I have a Wi-Fi network using this VLAN as well. A wired client is able to connect to this network and obtains an IP address. A wireless client is also able to connect to the network and o...
Hello!We have a Wi-Fi network at my organization which assigns IP addresses using Meraki DHCP. I learned that this is not the best configuration to use if you want Wi-Fi clients to have access to a shared printer connected via LAN. However, I am wond...
Hello! I am relatively new to Meraki, still getting used to how it all works.We are likely going to be implementing VoIP phones at my organization, and I created a new VLAN for these VoIP phones to be connected to. This VLAN is VLAN 4, on a subnet of...
Hello! We just got a new Access Point for our organization, far from other access points. One of our network's SSID's has VLAN Tagging turned on, and is tagged with VLAN 2. We are trying to get access to this particular SSID through our new access po...
I looked into the DHCP problem more and it looks like the uplink on one of the switches wasn't configured to allow the Voice VLAN through. It seems to be working now.Thank you everyone for your help!
To answer a few of the replies here, I tested to see if the DHCP server is actually working, and it isn't. I have configured it the same way as I have for my other VLANs (unless I'm missing a difference somewhere).Any ideas? Appreciate the help!
I hadn't tested it, no... but I have now and it isn't working. Not sure why the DHCP server isn't assigning an IP address because I have configured it the same way as our other VLANs (unless I'm missing something).
Hello, thanks for the info. I changed the port as you mentioned, but the phone still doesn't seem to be able to obtain an IP address. Any other thoughts? Thanks for your help!
