Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I've set up an SSID to use Local Auth for RADIUS with an LDAP server for authorization. I'm using 802.1x with the suplicant passing machine certificates issued by our own CA. Everything is working and clients are connecting, however in Windows 1...
I've been reading this article https://documentation.meraki.com/MR/Encryption_and_Authentication/Meraki_Local_Authentication_-_MR_802.1XWhich says that Meraki MR Local Auth can authenticate user certificates but I need to know if it can authenticate ...
Having some problems getting RADIUS to work on my Meraki AP where the RADIUS server is running on a Windows NPS VM in Azure. The VM is sitting behind an Azure firewall.Is this set up supported as I suspect there is some Fragmentation of UDP packets ...
Yes, 802.1x, Machine certificates. Because I have a DNat rule on the Firewall, the Radius client is configured to the inside IP range of the Firewall. I can see info in the Event logs on the Radius that shows inbound connections from IPs in the int...
Yes, I've checked the IAS logs and Event Logs and there are no more errors. I can force an error if I turn off the Connection Policy and a log entry in Event log gets created saying there is not matching Connection policy. If I reenable it, RADIUS ...
It's over the internet to an Azure public IP (Firewall WAN interface). I'm using a DNat rule on the Azure firewall to the NPS box. The Firewall and NPS VNets are peered and all the routing is definitely working.I can't use a VPN as there are alread...
