Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I try to change ip address of AP MR 36 it can not go online if i assign new ip address when i try to remove MX64 from network it is go online with new IP address ,i can ping it’s ip address but it can not go to the internet .the limit license = Curr...
I used MX as Transparent or Pass through So the only detect i can configure is by Mac Address the meraki are Placed After The org. Router so it’s role to apply group policy of clients
Thank you for your reply,i will try to discover if there is any issues with rules but ip addresses with AP doesn’t appears on MX 64 as clientsto apply group policy
Yes the static ip address is in the same vlan and the same subnet-mask-yes another ip address is currently working from the same subnet of this vlan on another MR 36 with the same frimware version.- i can’t change the mood of vlan from static to dhcp...
Thank you for your Response,there is no any issues related with ip conflict of MX64 and MR36 i can ping ip address and if i used this ip on any device it can access the internet i found or discovered if the MX64 not connected to my network the new ip...
The MX64 and MR36 are in the same vlan and it doesn’t go online is should the working AP appears as clients on MX64 - is there is any issues i have to review -know that i have checked the fortigate firewall it doesn’t appear any logs related to the n...
