About Mark Dennis

Mark Dennis · 07-24-2010

Is the following possible:Site_ANetapp filer (RJ45-IP Traffic)<------> MDS9513 (module ???-RJ45 SFP) <------> MDS9513 DS-X9304-18K9 (Gen2) (GigE LCC) <---------> DWDM Mux <------> to Site BSite_BFrom Site_A <-------> DWDM Mux <-------> MDS9513 DS-X93...

Mark Dennis · 02-25-2011

Hi Timo,It is highly recommended when using IVR to enable Cisco Fabric Services (CFS) on all IVR-enabled switches. Otherwise it may cause mismatched active zone sets if an error occurs during zone set activation.Hence I would initially suspect the RO...

Mark Dennis · 07-27-2010

Hi Blue Yonder,Already considered/Proposed - But because the Netapp Array currently doesn't have FC HBAs installed and wanting to reduce TCO and its considered to be a Less preferred option.In Essence - Can the MDS9513 Emulate a Standard IP Network S...

Mark Dennis · 07-26-2010

Hi Dynamoxxx,Yes you are absolutely right - it is for Netapp Replication "SnapMirror".... and Yes normally you would like to connect over an exsisting IP Network, but the current Linki is highly Utilised and the Client would like to investigate all ...

Mark Dennis · 07-24-2010

FMS Web Server Client comes as part of FMS - So if you have FMS installed and FMS Licensed on the switch (FM_SERVER_PKG - though you still get/have 180day grace period) then you don't need to install anything else.From the Host that has FMS installed...

Mark Dennis · 11-10-2009

Hi Robert,Form a quick look at what I can determine:1000BaseT-SFP-GLC-T (GLC-T) - is a 1000BASE-T SFP transceiver module for Category 5 copper wire DS-SFP-GE-T (SFP-GE-T)- is a 1000BASE-T SFP transceiver module for Category 5 UTP copper wire but has ...

Member Since	‎07-08-2009 10:44 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	7

User Statistics

User Activity

Connecting an IP RJ45 Device to an MDS9513

Re: Cisco IVR Issue

Re: Connecting an IP RJ45 Device to an MDS9513

Re: Connecting an IP RJ45 Device to an MDS9513

Re: FM Installation

Re: 9216i Ethernet port SFP question