Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings all;I have inherited a bit of a nightmare. We have a site built with a mix of about 45 Catalyst switches of different model/IOS all connecting back to a 3x 3850 stack acting as the core. I finally got things to a steady state. Segmented VLA...
Hello All;I am deploying a redundant pair of ASA 5545X Firewalls and using the ASA-IC-6GE-SFP-C fiber card to provide fiber optic interconnectivity to the firewals and for failover capabilities (The firewalls are located across the campus from eacho...
About as simple as you can get. Keep in mind, this is a 2960S so no requirements to specify dot1q.interface GigabitEthernet1/0/49switchport mode trunkno logging event link-statusend
Sorry for not updating this. I had found, after several hours of trial and error, that the problem was with the off-brand (RE Non Cisco) SFP Modules that my vendor had sent (We did in fact order GLC-LH-SMD, but the sent us a compatible module by mist...