About adamfayaz

adamfayaz · 01-17-2013

Hello,Currently I'm using Cisco VPN client software to connect to a remote IPSec server on the workstations.I want to to configure IPSec client on Cisco 2600 router which connects to the remote IPSec server so the workstations can access VPN subnet w...

adamfayaz · 01-25-2013

Hi Michal,Client mode works perfectly. Thank you so much for your help and get well soon.Best regardsAdam

adamfayaz · 01-21-2013

Hi Michal,Attached is the isakmp debug log.Thanks

adamfayaz · 01-21-2013

I think it is because the encryption and hash algorithm doesn't match? Because when I connect from the Cisco VPN Client software I can see that the encryption is 128-bit AES and authentication is hmac-sha1. But from the router log it is:*Jan 19 14:32...

adamfayaz · 01-21-2013

Hi Michal,I have changed the configuration, now it goes to phase 2 and some problem occurs. Here is the configcrypto ipsec client ezvpn mle3gsa connect manual group gsa3mle3 key GROUPKEY mode network-extension peer A.B.C.D username USERNAME password ...

adamfayaz · 01-18-2013

Hi Michal,Yes, Lo0 is outgoing interface and workstations are behind fa0/0.Here is the sh ip route outputGateway of last resort is 192.168.101.1 to network 0.0.0.0 10.0.0.0/16 is subnetted, 1 subnetsC 10.236.0.0 is directly connected, Loopb...

Member Since	‎01-17-2013 08:36 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	9

User Statistics

User Activity

Cisco 2600 router as an IPSec client

Re: Cisco 2600 router as an IPSec client

Re: Cisco 2600 router as an IPSec client

Re: Cisco 2600 router as an IPSec client

Re: Cisco 2600 router as an IPSec client

Re: Cisco 2600 router as an IPSec client