Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Very long story short, need to upgrade VM Tools from 10.x to 11.x on 100s of auto deploy 6.5 U2 ESXi hosts (UCS Blades). The customer is NOT in a position to upgrade to 6.7 with the latest 11.x tools already embedded. I am trying to create one of the...
I have a UCS environment on 3.1.1K firmware and I see that is TLS 1.2 capable (https://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone/ssl-tls-vulnerability-response.pdf)
Is there any additional steps to make sure TLS 1.0 is d...
Had quite an embarassing moment installing a UCS seed unit in a HUGE Dell shop this week. The potential customer is hardcore Dell and honestly, wasn't that interested in UCS. After showing them the hardware, service profiles, etc, their excitement ro...
Two questions:1 - Is the 100 GB SSD the largest SSD drive you can put in a B200 M2, even with the latest firmware updates?2 - If you have a 100 GB SSDs mirrored with the OS instaled, if you want to upgrade the drives, do you have to put the two new d...
We have two 10 Gb links going from our FIs to two core Brocade MLX switches. They work fine.Now, we are trying to do a Layer 2 Disjoint for two 1 Gb links to a Brocade ICX 6610 DMZ switch. No matter what we do, we get an "ENM Loop Disabled" error. If...
FYI, this was confirmed a bug in 3.1.1k by TAC. You have to go to a minimum of 3.1.3a to be able to adjust these settings in the GUI or CLI.
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCux49157
Thank you!
Thanks for the prompt reply!
I went to this location and that is why I was confused in the first place, there is no "Allowed SSL Protocols" section in my Communication Services page. I confirmed they are running 3.1.1k
Any ideas on why that secti...
I know it's easier said than done to just "dump Java" but I am with another very large customer today who is expressing the same frustration amongst their admins. I just hope that something can be done because its becoming a bigger issue as other lar...
Krun,I understand there are underlying components but as I mentioned before, if KVM and UCS Manager are constantly having issues with Java updates, it's worth looking at another platform. I am fine with dealing with it on a technical level but some c...
I understand there is no easy answer or quick answer but this is not the first or second time these updates have burnt as pushing the UCS product. The actual hardware and functionality is rock solid but getting into UCS Manager has always been hit or...
