Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good morning,I will show you my config first for quick understanding Cisco ASA: 192.168.1.1Inside network: 192.168.2.*Cisco ASA 5512-X with WAN IP configured on the WAN Port. We have 5 public IP addresses from our ISP (let's say for example 10.10.10....
We use a Cisco ASA 5512-x and have an external IP block from *.*.*.40 to *.*.*.46. The internet connection is delivered on a next hop .50 where the ASA routes the traffic.At the moment we have a Polycom HDX wich uses the .42 IP adress and we installe...
Hi all,We have a Polycom HDX8000 for video conferencing and a Cisco ASA 5512 firewall.We have to open ports for video conferencing, but we can't manage to get it work.When we callout from inside to outside everything works fine, but from outside to i...
Hello jcarvajaCan you tell me how to do this? I'm not sure because I don't have much Cisco knowledge.Maybe you can provide me a step by step guide to help me through?
Thank you for your answer. I'm gonna try this.Remember that my ASA has IP address 192.168.1.1 and the rest of my inside network 192.168.2.*How can I make the "translation" from 192.168.1.* to 192.168.2.*? Do I need to change the inside IP address of ...
I want to use 10.10.10.43 to be translated by the ASA to 192.168.2.251.The ASA is not in the 192.168.2.* range. Do I need to change my inside IP of the ASA?
Thank you for your answer.My ASA inside interface is 192.168.1.1My LAN is 192.168.2.*I configure my ASA directly on the Management port.Situation: WAN IP -- Cisco ASA WAN -- CISCO ASA Port 1 (192.168.1.1) -- Netgear Router 10.10.10.42 -- LAN IP's (19...
