Can you adjust after install ? I can not find any documentation on how to access this function other than adjusting during the install process. Any pearls of wisdom out there ? Thx
Hi,We have several small meeting rooms with Cisco Room USB systems. The user connects the HDMI and USB cables to the laptop and starts the meeting. Now recently on many laptops the camera stops working in a MS Teams call, using the camera of the Roo...
We have a campus deployment all with Cisco EQ Roomkits
We are using Extron SW2 HD 4kPlus in most of the rooms and in some we are using direct C2G switchers that have no configuration possible.
We are connecting to the EQ input connector 3 via a Fiber...
We have had a request for a macro to be created for a Cisco EQ device that allows one of the microphone inputs to be muted via the touch panel.In a room with a movable wall, our Cisco EQ system is situated. We must turn on the second microphone that ...
This happens on 2 devices.
We are not using UCM so below should not be true.
room-kit-administrator-guide-ce94.pdf (cisco.com)
Automatic factory reset when changing the call
service (device activation)
The video system will automatically factory ...
Hello,We have been using the Cisco room kits for about 4 years now and really like them. We primarily use them with webex. However, over the years we've started using Microsoft Teams more and more. We recently got a new Room Kit Plus and have it runn...
Hi Community,Given the old h/w, I feel my question should be an old FAQ with a model answer. (The nearest I could find to it was https://community.cisco.com/t5/call-control/lua-scripting-on-outgoing-invite/td-p/3456297 .One telephony VoIP trunk prov...
Is there a way to use a location of a presenter to trigger a camera switch with preset zoom and angle?Ask is to use a camera trigger like what is used in Presenter Track to trigger a switch to a second camera and have that camera be zoomed in to a se...
We have a few rooms with the same setup Pro codecs and Speaker Track 60's in the front of the room. When the rooms were updated over a year ago from the SX80's all of the testing looked fine. Now we are getting reports of very slow or no group/spea...
Hi,As it is known, OpenSSH vulnerability is found on some Cisco products. On security related sites, is it told that this vulnerability is resolved on OpenSSH 9.8p1. So OpenSSH versions shoul be upgraded to 9.8p1 to get rid of this vulnerability. Cis...
I have two endpoints (DX80 and SX20) When we dial into a cospace with multiple participants only our endpoint connects microphone mute. Our mics are unmuted when we dial into the bridge but they are muted on the bridge. Example is the DX80 and SX20 ...
I need to control two CS-CAM-PTZ4K cameras that are connected to a Webex Codec Pro via a Crestron control system.The Room Navigator is able to control both cameras, however, RS-232 commands from the Crestron to the Codec Pro for CameraId 2 return "Un...
We are facing a unique problem with majority of our DeskPro's and other endpoints.We are getting a random error "HTTP Proxy, The system is unable to connect through the configured HTTP Proxies".We have checked the proxy configuration and it is correc...
