Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have need of adding a 3rd WAN IP / I have 2 MX 100s in Passive/Hot-Spare mode. Our production is currently using Sonicwall NSA 2600's ..which has no problem using up to 5 WAN IPs. but we are using 3.We have 3 ISP connections1 ATT fiber = Main (sta...
I ran a PCI scan and the WAN interfaces are both coming up as failed with the following: 1. CGI abuses : XSSJQuery 1.x < 1.12.0 / 2.x < 2.2.0 XSSReasonThe remote web server is affected by a cross site scripting vulnerability.PCI detailsmediumPort80 /...
My Solution was to purchase a MX84 /Create a separate network in my dashboard /Create DHCP pool for VLAN on MX84On the MX84 /Addressing & VLANs /Per-port VLAN Settings / Tag LAN port (to Core) with VLAN IDConnect the MX84 to my Core MS425 Stack & ta...
By Default.. the Clients Dashboard page doesn't show the "Policy" Column.Here's how to add it, then sort by Policy and you will find Clients that you've BLACKLISTEDPrior to 30 days.
Currently the WiFI is routed through the CIsco Controller sending the Public SSID out the Comcast Public WAN (through the SonicWall) and the Campus WiFi SSID to the LAN/Default WAN (ATT)We've been enjoying having the Public WiFI segmented physically ...
AHHH HA...I figured it out. (like I said this, is a completely new setup)SO I went to the Firewall configuration page in my Meraki mgmt console / and I found underSecurity appliance services: Web (local status & configuration) ANY / see screenshotI ...
