Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guru's.I've cloned the configuration off one of my ASA5510's to another 5510 to use as a template for a new data center deploy. I have configured the new firewalls networks and rules, and of course changed the WAN IP config to its new setting.I wa...
Hi guru'sI'm trying to clone our ASA 5510 config from one ASA5510 to another. Both units are identical in that they have the same configuration and licensed options, except for the version of ASA running (8.2 vs 8.1 on the original).All seemed to g...
HI guru's,We've created an ipsec VPN tunnel between our ASA5510 (8.3) and a Pix firewall (not sure of the specific version, etc).The tunnel works fine, except for timing at times (traffic only goes through a few times a day), and a wierd problem with...
Thanks Julio,All VPN user passwords seemed to come across fine (at least mine did).Using the "more system:running-config" command I was able to get the VPN tunnel passwords that I will re-add to the new firewall.Thanks again for your help.Alan
Thank you for your advise. I was so close, and your advice got me over the line.I was using an IP out of the Firewall's WAN IP range thinking that that was the only way to test the firewall as an external untrusted user, and could not get through.B...
Thanks for your response.You are correct, except for 2 small things. I have not yet changed the external IP range of the new ASA5510 as yet. I want to test it before I start making changes to ensure the restore was 100% succesful. I've also trimmed t...
