Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello there,I would like to setup a test case to redirect all incoming http to VIP (with serverfarm behind it) base on 2 conditions below. Can someone point me to the right direction?Condition 1 - match source IP (eg: 10.1.1.0/24)ANDCondition 2 - mat...
Hi, can ACE Load Balancer teminate client connection with a customized html message (eg: server is offline for maintenance) when 2 rserver are down or probe is failing? Assuming there are 2 rserver defined in a serverfarm with a probe configured for ...
Hi,Would it be possible to configure ACE4710 to accept tcp connection on port 8900 and redirect them to 2 different rserver + url + different port number? Example:VIP:www.abc.com:9999/test1 #redirect to (a) or (d)www.abc.com:9999/test2 #redirect ...
Hi,I have a question, can someone share if the above advisory affect Cisco 3550-12G (c3550-ipservices-mz.122-25.SEB4.bin) or Cisco 6509 (c6sup12-js-mz.121-22.E2.bin)?http://www.cisco.com/en/US/products/products_security_advisory09186a0080af511d.shtml...
Hi, I have a router with 12.4(13r)t with about 20 IP Phones registered. We had a funny problem, hope to get some insight if it's a telco problem or config.We tried to get 1 phone to forward all inbound call to his cell. So as usual practice, he press...
Hi Surya,Looks simple, here's my revised config. Looks ok?####VIP on port 80####class-map match-all WEB_VIP 2 match virtual-address 10.10.10.10 tcp eq www####Match any URI on VIP above###class-map type http loadbalance match-any redirect-l7 2 match...
a) dhccoidQ: Yes try resetting the phones after removing this command. Do you really need this command in the config, I think it is supposed to be used with the dialplan command ie dialplan-pattern 1 1234567... extension-length 5A: Just did it again,...
I'd removed the "call-forward system redirecting-expanded" and same result. Do I need to reset the IP Phone after this change?Jul 18 18:55:42.373: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x6703 Bearer Capability i = 0x8090A2 ...
