Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have pix 515E 7.0 (4). For some time logging on to the server is delayed. Do not come all the logs. The configuration has not changed. In what may be the problem?Time on both devices the same.Oct 13 11:26:19 62.*.*.81 Oct 13 2011 11:05:40: %PIX-4-1...
There were problems with the configuration of static nat with the route-map and dynamic translation.There is such a configuration:ip nat inside source static 172.21.34.118 10.205.6.12 route-map net10ip nat inside source static 172.21.34.118 172.24.17...
Good day. It is necessary to make translation of the address between 2 interfaces: dmz2 security-level 10 dmz1 security-level 40 In dmz2 62.33.x.77 address It is necessary that in a network dmz1 it was accessible to the address of 62.165.y.77 the Com...
Good afternoon. I have the pix 515e with 6 interfaces. pix-firewall# sh verCisco PIX Firewall Version 6.3(3)Cisco PIX Device Manager Version 3.0(1)Compiled on Wed 13-Aug-03 13:55 by morleeHardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHzFlash E...
When i`m ping from host in dmz2 62.33.x.77 host in dmz1 192.168.230.10, I do not receive the answerin log i'm see Aug 9 14:23:11 pix-firewall Aug 09 2007 14:23:11: %PIX-3-305005: No translation group found for icmp src dmz2:62.33.x.77 dst dmz1:192.1...
My server is in dmz2 and has 62.33.x.77 address. I want, that to it had access from dmz1 to the address of 62.165.y.77, and it could have access in dmz1 with 62.165.y.77 address.
