About ooiaiyoon

ooiaiyoon · 12-24-2014

Dear All,Merry Xmas !!! :PI have read some cases of 'One way audio' but it seems can't relate exactly my current scenario.Mine setup is having CME setup on my 2901 router, analog phone attach to my FXS port to make call via SIP across another 'big cl...

ooiaiyoon · 12-22-2014

Dear All,I have seen some others posted similar question regarding this but mine still doesn't work by using the reference solution.Mine is quite standard setup too -> CME setup on my 2901 router, analog phone attach to my FXS port my outgoing calls ...

ooiaiyoon · 01-01-2015

Hi Aaron,Sorry for late reply,You said calls to mobile are one-way, and calls to fixed lines are OK? That's correct.I tried with your config but still the same. Attached is my log and the config as well. m=audio 30942 RTP/AVP 0 101c=IN IP4 58.27.18.6...

ooiaiyoon · 12-30-2014

Hi Aaron, Thanks for your reply, I haven't tested base on your suggestion as already left the workplace. However, I don't understand why would the 2 different dial peer affect each other as I thought the outgoing traffic map the desire dial peer ba...

ooiaiyoon · 12-30-2014

Hi Aaron,Thanks for the advice, the ipv4 0.0.0.0 0.0.0.0 was configured initially just for troubleshooting purpose, just want to try to allow to avoid any unexpected blocking traffic from reaching the CME. Anyway, I have removed it.For ACL, I just wa...

ooiaiyoon · 12-30-2014

Hi Aaron,No problem, in fact I make quite a few changes on the configuration due to the failure hence there are lines which might not using.Thanks for your help.

ooiaiyoon · 12-23-2014

Hi Carlo,Here it isCME_2901#show sip-ua timersSIP UA Timer Values (millisecs unless noted)trying 500, expires 180000, connect 500, disconnect 500prack 500, rel1xx 500, notify 500, update 500refer 500, register 500, info 500, options 500, hold 2880 mi...

Member Since	‎12-22-2014 01:54 AM
Date Last Visited	‎06-16-2021 08:32 PM
Posts	10

User Statistics

User Activity

2901 CME: One way Audio via SIP Trunk

2901 CME: Problem with incoming call via SIP Trunk

Hi Aaron,Sorry for late reply

Hi Aaron,

Hi Aaron,Thanks for the

Hi Aaron,No problem, in fact

Hi Carlo,Here it isCME_2901