Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Cisco 867VAE-K9 running IOS 15.2(4)M6.WAN is working correctly:* ADSL2+ Annex M* ATM PVC 1/50* PPPoE (aal5snap + pppoe-client dial-pool-number 1)* Dialer1 receives public IP address* NAT overload works* Internet access from the router works normallyL...
Hello Giuseppe,I performed the Wireshark capture on the client PC.The client receives DHCP Discover/Offer/Request, but I cannot see any DHCP ACK on the client side.I also used the Wireshark filter:bootp.option.dhcp == 5and no packets are shown.The cl...
Hello Giuseppe,Thank you for your reply.I applied both recommendations:interface Vlan1ip virtual-reassembly inand restored the default DHCP ping behavior with:ip dhcp ping packetsHowever, the issue still persists.Current DHCP configuration:no ip dhcp...
"Hi friend, I have that exact same problem with the Cisco 867VAE-K9. I use it for practice and it won't hand out DHCP addresses. I've tried everything. I have it connected to an ADSL line. Let me know if you were able to fix it. Here is my version: C...
