About dmitry.pelikhovsky

dmitry.pelikhovsky · 10-11-2016

Good day! There is: 2 cat4000 L3 switches with DHCP servers. DHCP servers hold one net 192.168.0.0/24 , ranges limited with excluded-addresses: Resulting pools: 1. 192.168.0.10 - 128 2. 192.168.0.129 - 254 On every switch in vlan with DHCP there is...

dmitry.pelikhovsky · 10-12-2016

Good morning, Richard! If I enable bootp process on routers PXE do not works in any config. All over the world forums posting about acronis and dhcp troubles, but this command is the key to resolve it.

dmitry.pelikhovsky · 10-12-2016

Sw1 and sw2 - core double star switches and they work 24*7 with STP, HSRP and other services. Interfaces vlan 301 of both switches was active all the time with routing, hsrp and all other services. To switch off DHCP I printed no ip dhcp pool test So...

dmitry.pelikhovsky · 10-12-2016

Good day! If (sw1 DHCP is up and sw2 DHCP down ) OR (sw1 DHCP is down and sw2 DHCP is up) PXE works. If sw1 DHCP is up and sw2 DHCP is up PXE does not works.

dmitry.pelikhovsky · 10-11-2016

sw1: ip dhcp excleded-address 192.168.0.1 192.168.0.128 no ip bootp server interface vlan 301 ip address 192.168.0.4 255.255.255.0 standby 192.168.0.1 standby priority 2 no ip redirects no ip proxy-arp ip helper-address 192.168.1.200 ! ip dhcp pool t...

dmitry.pelikhovsky · 10-11-2016

Good day, Richard! DHCP servers addresses: 192.168.0.1 - HSRP Primary addresses of interfaces: R1 - 192.168.0.4 R2 - 192.168.0.5

Member Since	‎10-11-2016 08:43 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	6

User Statistics

User Activity

2 DHCP in 1 VLAN and IP helpers

Good morning, Richard!

Sw1 and sw2 - core double

Good day!

sw1:

Good day, Richard!