About luchtcm

luchtcm · 08-07-2014

Hi all,We are running Cisco Unity Connection 8.6.2ES25.21900-25 and are attempting to do some bulk updates via the CUPI API. We're running into an issue where we believe we should be able to set the SMTP Notification Device Footer Text based on the d...

luchtcm · 10-26-2011

All,We're rolling out several thousand Cisco IP phones over the next couple of years and, as we're doing so, we're finding that the MAC process is rather complex. We've done a couple of things to help simplify the process and we utilize bulk adminis...

luchtcm · 02-15-2008

All,We're currently looking at two vendors to replace our current voicemail system. Cisco Unity is one of the two products we're looking at.Immediately, we're looking to replace voicemail for 3000 users in our home office. However, we'll be replaci...

luchtcm · 08-19-2006

All,I've got a PIX 515. Prior to my attempt to upgrade, it was running 6.3(3). I tried loading 6.3(5) but get the following after doing an upgrade:Writing 1978424 bytes image into flash... ###########################################################...

luchtcm · 02-14-2005

All,We had, up until recently, a Unity 3.1 and CM 3.1 system integrated. The CM version was bumped to 4 last weekend. Since then, the following behavior has been noticed:When a caller calls in from the outside, they get the automated attendant. If...

luchtcm · 01-23-2015

Not that it's really any less scary, but you can update via the CLU or AXLAPI.If you're using Extension Mobility at all, you can update the owner ID based on whoever is logged in: CUCM set device owner ID to EM logged in user ID via SQL | Crystal Cle...

luchtcm · 08-07-2014

That's useful. Yeah, so, it's not in there. I take it then, that there's no way of updating that through CUPI, correct? I know that we can bulk update it through the Bulk Update utilities, if nothing else.Thanks!

luchtcm · 11-28-2012

The best place I know to point you to is the SRND guide which has a section on "High Availability for IP Phone Services": http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/cmapps.html#wp1185533 You're essentially right on with your ideas on ...

luchtcm · 08-19-2006

I also just erased the flashfs using erasedisk, with the same results. 6.2(4) is the highest that I can seem to go.

luchtcm · 03-02-2005

Just a quick update on this. TAC has been working on the issue for two weeks now without resolution. So, my guess is that it's not an easy fix, whatever the issue is.Internally, if you dial the voicemail pilot and then dial the extension, it never ...

Member Since	‎01-29-2004 02:07 PM
Date Last Visited	‎08-15-2018 02:19 AM
Posts	24

User Statistics

User Activity

Can't Set SMTP Notification Device Footer Text Through CUPI API

Is Anyone Using Provisioning Manager?

Mix and Match VMO and Unified Design Question

PIX 515 Failed 6.3(5) Upgrade

Release to Switch Never Forwards to Voicemail

Re: CUCM 9.1.2- BAT update owner user ID for licensing

Re: Can't Set SMTP Notification Device Footer Text Through CUPI API

Re: Extension Mobility service redundancy

Re: PIX 515 Failed 6.3(5) Upgrade

Re: Release to Switch Never Forwards to Voicemail