Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to set up two 1232AG Access Points as a bridged link between two buildings. They wish to use the "G" radio for data (VLAN 1 - native) and the "A" radio for voice. Both AP's have an IP address in VLAN 1 and are configured to allow VLAN 1 t...
Hello there,I have a customer who has a BBSM 5.3A which is running the latest patch (5332) and it cannot discover 1242 series AP's as valid network elements. They get the following:2009/01/07 12:01:53 Pinging X.X.X.X...2009/01/07 12:01:53 X.X.X.X is ...
Are you using the GLC-T modules in the controller? These have an issue with bringing up the ports on the controller for some reason. I have installed these at a few customer sites and had to reboot the controller several times to get all ports up and...
Thanks for the reply John. We want to separate the voice over a different radio interface to the data and it seemed logical to send the voice over the "A" radio as it is not widely used here in the UK yet. We got it to work by enabling spanning-tree ...
