Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello
Time ago i asked similar question but about different models.
I have Cisco APs1602i (autonomous). Always for simplicity i was preparing new one like:- saving config from existing one "Current Startup Configuration File"- edit ( changing IP, N...
HelloI am straggling with quite complex case, here is short description ( ask for more whats needed ).- i had 9 AP of Aironet 1130AG in one location (two building) - running correctly for at least 4 years (except some individual incidents). Those AP ...
I have some 1130AG (autonomous ) AP's that are working fine.But clients connected to one of them recently starts to have extremally poor connection quality.As channel (1) being used is occupied - decided to change to 6 - after that change (and only t...
helloI have AP 1602 configured by applying configuration from other AP (1130) - discussed here https://supportforums.cisco.com/message/4052107#4052107I had no problem with applying configuration.EAP-TLS is used. Clients are connecting properly and ar...
helloAt the moment i have ~30 AP's like 1131AG. Always for simplicity i was preparing new one like:- saving config from existing one "Current Startup Configuration File"- edit ( changing IP, Name, Radius IP )- upload to new device.Now i am not able ...
- 802.11n was one of the reasons why i moved to 1602- i wrote "lately i applied 15.3(3)JAB firmware but seems is not resolving the problem" - but after checks could be "false alarm" as not related issue, I will keep it as is for next days awaiting fe...
Thats good news - if its only cosmetic i can live with that.Re InSSIDer - thats exactly what i though but i have no tools to check that. In fact if i have such behavior in new deployment or new office that would me my first approach but in this case...
HiThats not my case, everybody has the same experience including myslef when i check that.AP operates correctly on (after brief test ) all channels except 6. I "inSSIDer" the channels but there is nothing running on 6 btw thats also the reason i pref...
HiSorry for not being clear, thats correct those are autonomous AP's( i have no controller ).Thats really good news for me as i wont have to config from scratch ( not so straighforward with all the options required - specially on new model)Thank You ...
