About scroffy123

scroffy123 · 10-20-2011

I have a scenario where I need to ensure that a few users in one office only associate to one AP in particular. Is it possible to tie a mac address of a device to one AP?Basically I have a floor in the building with 5 AP and have 3 users sitting in a...

scroffy123 · 10-21-2011

Hi, turns out I was being stupid. Since I am running AP Groups and have two WLC I realised I only had the SSID presented on one WLC AP Group and not the other. All sorted out now but thanks for the advice and hopefully I will be able to get to the le...

scroffy123 · 10-21-2011

Stephen,I will set this at the most aggressive roaming level.Thanks, will report back.Sean

scroffy123 · 10-21-2011

George,I have 30 1142 AP mounted on the ceiling panels and two 5508 WLC in a mobility domain. The AP are spread across 5 open plan floors ( there are plenty of glass partitions and meeting rooms ) and we run AP Groups and each floor is in its own su...

scroffy123 · 10-20-2011

George,Thanks for the reply. The issue is that despite being 5 metres from the AP 2 devices will associate with a AP further away and with a lower signal strength.I will attempt to lock a test device to a single AP and test.Thanks

Member Since	‎10-20-2011 10:24 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5

User Statistics

User Activity

Restricting users to a single Access Point

Re: Restricting users to a single Access Point

Restricting users to a single Access Point

Restricting users to a single Access Point

Restricting users to a single Access Point