Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Ok, newbish to cisco stuff, just put in a new 506e. Everything is working so far, except now my high speed debit/credit terminals will not communicate through the router. Moneris says port 443 has to be "open". Well, it is, isn't it? I can c...
Hi, new to cisco stuff. First thing i had working on the new PIX 506e was the VPN. Set up the IP Pool, group, and username. Installed the client, worked great. Now that ive been playing around with figuring out rules, acl's, translations, ...
I have a VPN setup using the Pix and the cisco VPN client. This will be for my remote users to use for remote access so i can lock down the rdp ports currently used.
"Well, thats a good question. I'm assuming its outside to inside, which should have no issues."I beleive i meant "inside to outside", sorry if that caused any confusion.
Not much to sanitize really sh natnat (inside) 0 access-list inside_outbound_nat0_aclnat (inside) 1 0.0.0.0 0.0.0.0 0 0sh global global (outside) 1 interface
