About barryhill

barryhill · 03-30-2007

I connect to my remote network (Pix501) using EasyVPN with a shared key. I have checked the allow local lan access selection on the transport tab but cannot access the internet through my local lan/router. Any suggestions?

barryhill · 03-15-2007

We have a PIX 501 connected to DSL using PPPOE with outside to inside VPN setup and functioning using the EasyVPN client and a preshared key. We replace the DSL modem with a small router that is now doing the PPOE negociation instead of the nPIX. I h...

barryhill · 04-13-2007

Split tunnel and ACL has been configured. The problem is that the local computer makes the IP address assigned to the VPN connection (DHCP assigned by the PIX) as the default gateway in the route table.

barryhill · 04-06-2007

Sorry. I didn't explain myself well enough. I am working from home and using EasyVPN to establish a VPN tunnel through our Pix501 at work to access our work network. I want to concurrently use the internet. What set up is required to do that?

barryhill · 03-27-2007

That fixed the Remote Access. Thanks.

barryhill · 03-20-2007

I won't be able to try this until Sunday night. Thanks for your help. I'll let you know the results then.Barry

barryhill · 03-19-2007

I am now connecting with the VPN client but cannot access any resources. I have attached client log (everything appears O.K.) and the PIX configuration. Note that in the PIX configuration there is an "Incomplete" coment but I don't know why. Also ass...

Member Since	‎03-15-2007 09:25 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	7

User Statistics

User Activity

EasyVPN client and internet/local lan access

PIX 501 VPN change from PPPOE

Re: EasyVPN client and internet/local lan access

Re: EasyVPN client and internet/local lan access

Re: PIX 501 VPN change from PPPOE

Re: PIX 501 VPN change from PPPOE

Re: PIX 501 VPN change from PPPOE