Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 1552 E-A-K9 AP, connected to a 5508 WLC,Software Version 7.0.116.0. The problem i am experiencing is that all the existing P's on the WLC is working 100%, ( 1142's) but.The 1552 does lease an IP adress from DHCP, and it d...
Hi Scott,I have tested on the same Vlan as the WLC, a completely new Vlan with DHCP scope, but still nothing. Herewith an extraction from the AP logs.Thank You for Your help.% CDP is not supported on this interface, or for this encapsulation*Jun 5 0...
Hi Scott,I have added US to my existing contry code (ZA), and get the following when doing a debug capwap event.Thank You for Your help.(Cisco Controller) >*spamApTask2: May 29 14:25:35.566: Invalid channel 1 spacified for the AP AP2c3f.38be.3640, sl...
Hi Scott,I have added the AP's to the mac filter, and have set up the DHCP Scope option 43 as per Cisco documentation. I did "see" the AP on the WLC briefly, downloading and then it disapeared. i have the following Logs.*spamApTask2: May 29 12:10:06....
