I have 4 routers connected via serial dce/dte cables. from any of the rtrs I can ping any interface including the 2 1900 switches that are trunked together. I cannot ping beyond the dflt gtwy. with my nic pluged int either switch i can surf. why can'...
I have 2 1900's f0/26 & f0/27 "suspended no link-beat" the led's don't come on, have entered trunk on. I get this if I'm connecting to the other 1900 or aui of a 2500
This is probably very elementary but I'm just starting on my own. I have 4 2500 routers 2 1900 switches. 1 switch is at lab-a at e0 192.168.15.103 with ny isp router in port 24. dflt gtwy .15.1 from any router I can ping my dflt gtwy but not beyond....
No. I don't have anything in it. since the pings to default were good through all routers and switches, I figured it was right. the default gtwy on my isp rtr is 192.168.15.1 and that rtr is configured to issue dhcp starting at 100. I have e0 set as...
I am using eigrp on the routers, do not have a default gateway set in the routers, I connect to the internet through a linksys router provided by my ISP. I assume it does the nat, pat. The cisco rtrs have only 1 ethernet each,I have one that connects...
Yes port 26 & 27 are trunk links and 100mbps, but from what I can see in my class book, the trunk links on one switch feeds a trunk link on the next (daisy chain) I don't know if an aui on 2500 rtr is half or full duplex or what. Thanks for respondin...