About lars.arler

lars.arler · 09-06-2019

Hey GeorgI’m a little challenged by the fact that the 2921 Router is a live production Router.But I’...

lars.arler · 09-01-2019

Thanks againI’ll try it out as soon as possible and let you know

lars.arler · 08-29-2019

Thanks again George PauwenHere is the complete config..version 15.2hostname R2911boot-start-markerbo...

lars.arler · 08-29-2019

Hej and thanks in advance for helping out with any clues to resolve this issue... I'm a little confu...

lars.arler · 08-24-2019

Final and Full working config - regarding ZBFobject-group network GROUP_DMZ_FILEMAKER description FI...

lars.arler · 08-13-2019

Hi guys and thanks again for taking you time to help explain..My goal is to only allow 5 ports throu...

lars.arler · 08-09-2019

I finally found a solution to my problem ;-) My (DMZ) and (Remote VPN) are on the same IP range, BUT...

lars.arler · 08-08-2019

Hi again and thanks in advance.I had some good help from Georg Pauwen before and he found som issues...

lars.arler · 08-02-2019

Thanks for your time GeorgYour solution didn’t solve the issue -But it boosted the general response ...

lars.arler · 08-01-2019

Hi Paul and thanks for taking your time. PRIVAT --> INTERNET = WorksPRIVAT --> DMZ = WorksDMZ --> IN...

lars.arler · 08-01-2019

hostname R2911!boot-start-markerboot system flash c2900-universalk9-mz.SPA.154-3.M.binboot-end-marke...

lars.arler · 08-01-2019

Hi again and thanks in advanceI just vent from static firewall to Zone Based Firewall as sugested in...

lars.arler · 07-21-2019

Hi - and thanks for taking your time to help ;-)I tried to use your command - crypto isakmp aggressi...

lars.arler · 07-21-2019

Hi All and thanks for any clues or solutions. First Issue My VPN setup seems to work ( Connects fine...

lars.arler · 07-11-2019

Tanks a lot Seb ;-) It was the IP NAT INSIDE to the VIRTUAL-TEMPLATE 1 TYPE TUNNEL there was missing

Re: VPN and ZBF - Issue with country location