Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi, I have following configuration on the pix 515nameif ethernet0 outside security0nameif ethernet1 inside security100nameif ethernet2 test 75nameif ethernet3 med security40From med to test, we need set up the outside nat to nat the med's IP became o...
Hi, I have tried to configure the backup serverfarm on CSM to provide sorry server service for my primary serverfarm. Following are the configuration I had:serverfarm TTreal 10.0.0.1inservicereal 10.0.0.2inserviceserverfarm SorryTTreal 20.0.0.1inserv...
yesterday I tried to upgrade my 2501, 2502's flash memory from 8M to 16M. Looks it's working on 2501 when I upgraded it to 16M. But when I upgrade 2502 I met some problem. 2502 can't recognize those 2 SIMM 8M flash memory. It show flash space unknown...
Two 2502 routers. Connected with each other by a Andrew token ring MAU 8228 plus. Configured IP on each token ring interface on the routers. Show interfaces tokenring shows that port is up, protocol is up. Router can ping the token ring interface its...
yes, I can hear it. Yeah, ring speed are identical, interfaces are in the same subnet. I changed ring speed both to 4 and tried both to 16. The same situation. Maybe it's a bad MAU. Thanks a lot.
