Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Our web and ftp servers reside on our pix DMZ interface, these systems have registered ip addresses and need their real ip's available to any host (no nat). The external IP interface on our pix is a single registered ip address assigned by our data ...
I thought I had this figured out but now I don't.Need inside and dmz if's to have access to www.Need dmz systems to access specific systems on inside via specific ports.Need inside systems to talk to dmz systems on specific ports.I have attached my c...
When I apply an acl to the DMZ interface I lose the dmz devices connection to the internet? The access-list / access-group I apply works as it should, but internet is gone. When I remove the access-group, internet access comes back. I have tried a...
This PIX is in a lab environment - Does the PIX throttle resources based on available memory?By limiting the memory and runing OS version 8.0.3 and ASDM 6.03, are we hindering performance or functionality?
hmmm... while waiting for this reply I went ahead and added an addl 128mb dimm of PC100 sdram for a total of 192mb, and it's working. Show memory indicates the correct amount as does ASDM 6.03. Is this OK? ASDM actually shows the current used mem a...
Self-Stat.?? I do not see that in my handbook. It worked though! Thanks. I did try something in the meantime that didn't work but I thought should have...conduits. Can you explain whne that would be appropriate to use?Thanks again - 5 points fro...
Got it - static routes and static nat...I was speaking of nat. So on our version 6.3 acl's are for inbound only. We have the software and ability to upgrade to pix 7.0.... do you recommend?
