About lonnycisco

lonnycisco · 05-11-2007

Just got a new ASA 5510 and I am having a hard time letting any trafic through. I can ping the outside interface xxx.xxx.xxx.xxx but none of the ports are open.Ethernet0/0 outside xxx.xxx.xxx.xxxEthernet0/1 inside 10.10.10.10The nic on my iis server...

lonnycisco · 05-09-2007

I have a windows server 2003 box running 2 ssl websites. Currently I am only using the windows firewall and have put both the two exteral ip addresses on one nic card.What I want to do is the same thing just on the ASA 5510. Is there any way to map ...

lonnycisco · 05-19-2009

Same exact problem here. Just upgraded to asa 8.2(1) and asdm 6.2.1. That did not help at all. Must be some kind of setting in the ASA. Did you get it figured out yet?

lonnycisco · 05-13-2007

Jay,I entered the first 3 commandsaccess-list https_in extended permit tcp any host 209.164.3.5 eq https access-group https_in in interface outside static (inside,outside) 209.164.3.5 192.168.2.57 netmask 255.255.255.255 then I submitted. There was ...

lonnycisco · 05-09-2007

Expanding on the first question how would you tell the router:I only want to allow access to ip address 23.124.124.12 from these wan ip addressesxx.xx.xx.xx and zz.zz.zz.zz ...andI only want to allow access to ip address 23.124.124.13 from these wan ...

Member Since	‎05-09-2007 08:57 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	5

User Statistics

User Activity

Newb question - How do I open port 443 on ASA 5510

ASA 5510 - Multiple outside ip addresses on one ethernet port?

Re: AnyConnect 2.3.254

Re: Newb question - How do I open port 443 on ASA 5510

Re: ASA 5510 - Multiple outside ip addresses on one ethernet por