About stephen.ebdale1

stephen.ebdale1 · 10-06-2021

When enabling application telemetry on our 9300 switches some are reporting 'No Telemetry-applicable interfaces found!'.' Other 9300s running the same (16.12.4) or older (16.9.4) versions of IOS-XE are fine. I have had a look at the port configuratio...

stephen.ebdale1 · 09-09-2022

Correct, don't click device cleanup. Nothing changes on the switch. Once added you will need to assign it to a site and, possibly, enable and deploy Telemetry once the resync has finished. Rerun the Image Update Readiness Check and, hopefully, HTTPS/...

stephen.ebdale1 · 09-09-2022

Have had the same issue with 3850 & 9300 switches. I found that deleteing the switch from DNAC and then adding it back in often sorted this problem out.RgdsSteve

stephen.ebdale1 · 10-11-2021

Hi I have added LAN to the port description but it does not work. We have other 9300 switches that have telemetry enabled that do not have LAN in the description. The issue is with switch ports, not an SSID. The switches that do have telemetry enable...

stephen.ebdale1 · 10-08-2021

Hi Rasmus, thanks for responding. DNA version is 2.2.2.5 License level is DNA Advantage. Interface configuration is typically: interface GigabitEthernet1/0/10description **PC/IP Phone Port LAN**switchport access vlan 10switchport mode accessswitchpor...

Member Since	‎07-06-2015 04:48 AM
Date Last Visited	‎11-17-2023 04:48 AM
Posts	5

User Statistics

User Activity

Enabling Application Telemetry

Re: DNAC - Software updates

Re: DNAC - Software updates

Re: Enabling Application Telemetry

Re: Enabling Application Telemetry