I have two sites connected via a DS-3 connection and am bridging lat from site a to site b. The Dec servers at site b stopped communicating and now after a reboot do not receive their load from our server at site a. I am now attempting to troublesh...

We recently had a physical disaster in our computer room and had to physically move our LS1010 and Cat5500 switches to an adjacent room. We had singlemode fiber coming in and terminating into the LS1010 which then is converted to multimode and distr...

What is the recommended time to set the cam aging table on cisco cat 6509s? The default is 300 seconds for the switch. Also, what are the ramifications of flushing the arp cache on the msfc cards?

I have around 50 vlans, of which 25 have dhcp scopes w/ the protocols dhcp and bootp enabled. Printing devices in an almost full vlan lose connectivity after x amount of seconds (<300 sec.). These devices are in scopes with dhcp enabled, if I take ...

I have a 100baseFX MM sup ws-x5506 w/ 32MB dram and 8MB flash running 4.5(13a). My question is what is the next rev I can go up in upgrading the supervisors code.