Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a data centre WAE-574 using WCCP redirect. Behind a firewall I have the CM. In a remote location, +/- 600ms RTT, I have another WAE-574 in line mode. This was working perfectly until it was powered off. It lost all its config on recovery...
Hello,I have a data centre WAE-574 using WCCP redirect. Behind a firewall I have the CM. In a remote location, +/- 600ms RTT, I have another WAE-574 in line mode. This was working perfectly until it was powered off. It lost all its config on recovery...
Hello,When I attempt to display statistics from our 2 WAE's from the CM I get the following errors. Do you have any ideas ?Best regardsStephen2012 Jan 23 06:57:45 WADMZJA01 java: %WAAS-CMS-4-700001: cdm(TP-Processor3): ce= 1118GetConnTable request fa...
Hello,I have two WAE 574 devices and a CM 274 all running code level 4.3.1.6, The CM is behind a PIX firewall. There is no firewall between the branch and core WAE. The branch device is behind a NAT router. The CM and SSL ASA rea behind a PIX 515 fir...
Hello,My WAAS configuration is up and running but I have lost the graphs from the CM dashboard. Can you tell me how to retrieve them please ? Also, I have set up the service to intercept and optimise SSL traffic but it just logs them as pass-through ...
Hello,The problem was WCCP. This was removed and the device registered and came online. However, When WCCP was re-enabled I now get the device going offline again. Is this an SSL issue between the 2 WAEs ?2012 May 30 08:18:41 WAHKHK01 java: %WAAS-CMS...
Hello,Just as a reminder. The remote WAE contacts the central manager via the data centre WAE. All incoming traffic from the branch is redirected via WCCP.Should I take WCCP off for the registration ?Best regardsStephen
Hello,Firewall is Palo-Alto. Both the data centre and remote WAE's are in front of the firewall and the central manager behind, Te data centre and CM work correctly. Both the data centre WAE and the remote WAE have synchronised clocks. The central m...
Hello,Clarification. There is session traffic (FTPS) between the remote site and the data centre WAE. I can see in the SH STAT CONN command on the data centre WAE traffic for devices behind the remote WAE. This means the remote network is reachable ...
