Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have the following network (map below). When the T1 is operational DHCP clients at the remote site in VLAN 1 (10.10.10.0/24) work as expected via the ip helper on the 'Site Router'. However, when there is a long term failure of the T1, clients can ...
Supposedly the MTU is found in the following reg key:HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\[Adapter ID]]My issue though is that when I went to look at the MTU setting it was set to 1300. I know I have sent l...
