About georgemonier_1982

georgemonier_1982 · 01-25-2009

We all know that traffic shaping enables us to burst traffic of a value Bc during Tc interval (if no Be configured of course) and that it retains out of profile packets in a queue till it have enough tokens to send more pakets and the question is , ...

georgemonier_1982 · 01-24-2009

For the below conf , what takes place first ?shapping--->>CBWFQ-->Policing ORPolicing--->>CBWFQ-->>shappinginterface Serial0/0/0.1 point-to-point ip address x.x.x.x 255.255.255.252 frame-relay interface-dlci 539<<--FRTS class COS-OUT-...

georgemonier_1982 · 01-24-2009

For the LLQ queuing tech , I know that for the traffic in the priority queue is policed first before it is dequeued dropping out of profile trafficso as not to starve other classes The questions is , what happens when the other class are not sending ...

georgemonier_1982 · 06-13-2007

For the NSAP adress we have this formatAFI IDI HODSP SysID Nselthe address of a router in area 4 for example can be49.0004.0505.05FA.0555.0049 is AFI and 0004 is the HODSP so where is the IDI which is up to 10 butes long ?? Georg...

georgemonier_1982 · 01-25-2009

Jon Really thank you , can you check also my other question "Shapping first or CBWFQ ?" may be you have discussed it before :DGeorge

georgemonier_1982 · 01-25-2009

John No in fact we do have FRTS on the DLCI , I just did not want to add it so as not make the post too long , I only add "<<--FRTS" to the DLCI map-class frame-relay COS-OUT-S0/0/0.1 frame-relay cir 1986560 frame-relay bc 40960 frame-relay be 0...

Member Since	‎06-10-2007 07:15 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	6

User Statistics

User Activity

About traffic shaping

Shapping first or CBWFQ ?

QOS issue

Where is the IDI ?

Re: QOS issue

Re: Shapping first or CBWFQ ?