About cmcfarling

cmcfarling · 06-14-2007

I have a Cisco 2621 router in front of a Watchguard Firebox III 700. The interface (FastEthernet0/1) IP on the Cisco facing my LAN is 100.200.300.1, for example. The IP on the FBIII external interface is 100.200.300.2.Using any computer behind the FB...

cmcfarling · 06-18-2007

Problem solved.By enabling debug ip packet I was able to gleen a little more info from the log. I saw that CEF switching was coming into play. Disabling CEF seems to have solved the problem. I don't know enough about CEF to determine why it would cau...

cmcfarling · 06-18-2007

If this were a speed/duplex issue, wouldn't it stand to reason that all traffic through this interface would be affected and not just traffic to/from the 2621?

cmcfarling · 06-15-2007

It's been this way for a while. I can't say if it has always been this way though. It's just that I decided to finally try to get to the bottom of it. Attached is the cpu utilization. This output shows it being minimal. Even in this state I get the s...

cmcfarling · 06-15-2007

cisco2621#show int FastEthernet0/1FastEthernet0/1 is up, line protocol is up Hardware is AmdFE, address is 0008.a3b3.b6a1 (bia 0008.a3b3.b6a1) Description: SBC primary T1 Internet address is 64.171.123.1/24 MTU 1500 bytes, BW 100000 Kbit, DLY 100...

cmcfarling · 06-15-2007

See attachment for config.

Member Since	‎06-14-2007 07:48 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	11
Total Helpful Votes Received	5

User Statistics

User Activity

50% packet loss to/from 2621 router

Re: 50% packet loss to/from 2621 router

Re: 50% packet loss to/from 2621 router

Re: 50% packet loss to/from 2621 router

Re: 50% packet loss to/from 2621 router

Re: 50% packet loss to/from 2621 router