Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Need more info - I suggest opening a TAC case.http://www.cisco.com/en/US/customer/products/hw/switches/ps663/products_tech_note09186a008014741c.shtml Use a syslog server to capture the output.Use the recurring command feature in TeraTerm Emulator I.E...
Learn to use the TFTP server method.Cisco suggests this TFTP product that can transfer more than 32M and is also a syslog server:http://tftpd32.jounin.net You can not TFTP via a console cable so you need an ethernet connection. The easiest way to cop...
Is the Modem still busy from the previous call? - time out 120 seconds? Does the ISP check for multiple MAC addresses on the same line - as you said you use the same line with a splitter? Probably need to know what the Modem is doing: #show modem sum...
You should not be able to have any functionality on the standby Sup's console. Do a #show mod and see if your standby Sup is the actially thr Active Sup (session 16 in IoS) but the MSFC is still running on the primary Sup (session 15!?) To access the...
Download the freeware graphical traceroute utility WinMTR. That should give you some further indication of why its taking so long.. http://www.snapfiles.com/get/winmtr.html
