Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm struggle configuring an Aironet 1200 with 2 VLAN's. I want to setup the AP with one VLAN for normal LAN access and a second VLAN as guest VLAN for internet access only. The AP is connected to a 2524 HP layer 2 switch which is connected further to...
Hi,whatever I did changed nothing, so I decided to reset the AP and startover from scratch. This did the job. I ended up with the following configuration:dot11 vlan-name Guest-VLAN vlan 30dot11 vlan-name default vlan 1!dot11 ssid HH-FIR-01 vlan 1 ...
Hello,thanks for your reply.I put in both lines, but still no success. I'm nearly sure the uplink switches are configured correctly, as a wired client connected to the same uplink switch (the 2524) can access the internet GW. In HP language, the port...
