Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Texas just came out with a new law requiring phone systems / phones to be able to directly dial 911 without having to dial 9 to get an outside line. You must be able to take the phone off hook and dial 911 and get an emergency responder.
Can I get th...
This solution is confirmed working and is much better than changing the dial plan on the phone itself. You make the change in the UC320 and the phones can still be configured from the UC after. Simply fantastic and thank you!
After some research I figured out that the dial plan can be edited from the phone web interface. No such option exists in the UC320 to edit/create a dial plan.
I am going to try turning off the phone provisioning on the UC320 (by turning off the prov...
Phones being used are SPA509G. Also forgot to mention that 9 is being used as a steering digit to access an outside line. Tried switching the steering digit to 8 but then dialing 9 resulted in fast busy.
Sounds like the phone was hard reset... If you issue the command 349167285*0# the firmware on the phone gets completely wiped and the phone will just sit at a blank screen and look like it is dead. It should eventually pull its firmware again but thi...
