Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello I am working in X-Net Limited. Our Company is data communication service providers company. To provide service, we are using cisco routers as core equipments of backbone network. I am facing a problem with using ip helper-address. Previously I ...
RickI said that the my customized software to broadcast was independent of PC Netmask, whether it is of 16bits or 24bits. This software always follows 8bit/16bit/24bit broadcast for class A/B/C network. If I change the pc netmask, software was not fo...
RickI used a network analyzer (ethereal), which showed that my customized software was always broadcasting UDP packets as per Class A, B or C & this broadcast was independent of PC Subnet Mask.Any comments....RegardsAbu Sayed
Hello RickPlease find the attached 4-step tests & their logging info. At east steps, router was reloaded with new configuration. In these cases, I used the logging info level 7. RegardsAbu Sayed
RickSorry for being late to answer as i was in leave & thanks for your patience regarding my problem.I used a wrong term CLASSLESS routing. I want to mean that IP helper address works with my new routers when a)for class A network, subnet mask is 255...
RickSorry that i've not given enough information. Actually in previous 2600 & 3600 routers, we used this "ip helper-address" feature to forward protocol of port 4000 to 6000 & it is working till now in at least at 100 locations. We also used this "ip...
