About Postal4x4

Postal4x4 · 04-29-2008

Dear Obi-wan,I am attempting to configure 3 vlans and have the hosts on each vlan get an IP via dynamic dhcp with unique scopes that I have set up for each vlan ( I am using ip helper-address 10.21.1.50). I also need to have internet access in each ...

Postal4x4 · 09-02-2008

Are you using the CLI to issue the command? The reason I ask is I have had instances where issuing the command via a GUI did not acutally apply the command.This is rather peculiar...

Postal4x4 · 08-27-2008

Are you sure it was not the other interface of teh 3845 that was shut?

Postal4x4 · 04-30-2008

Jon,No, fw is not trunked. 1) I am assuming that the tab that allows me to add networks and hosts is really the cli version of 'routes'.2) The first tab is the firewall rules. There is an option to show details of each rule and I see that once I ad...

Postal4x4 · 04-30-2008

Jon,I added the vlans as separate Hosts/Networks via the Cisco PDM. I am not fluent enough to use the command line :(Along with each vlan is the option to define the gateway, so I added the svi for each vlan as the gateway.When I was complete, I ver...

Postal4x4 · 04-30-2008

Jon,thanks for the quick replies on this issue, I have been stressing over this and I see the light thanks to your guidance. I updated the previous thread while you were replying, sorry.The dhcp is now set with a dfg of 10.21.0.19 and is passing out ...

Member Since	‎09-13-2007 02:11 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	8

User Statistics

User Activity

VLAN routing on hybrid 6509 also need Inet access

Re: Interface in shutdown, Link-LED stays on.

Re: Interface in shutdown, Link-LED stays on.

Re: VLAN routing on hybrid 6509 also need Inet access

Re: VLAN routing on hybrid 6509 also need Inet access

Re: VLAN routing on hybrid 6509 also need Inet access