Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Customer is connecting an Ethernet port off a CSS11502 to a port on a Dell PowerConnect 5316M on software version 1.0.0.24. On the CSS11502 there are FCS errors and Ethernet errors on the Dell switch. Has anyone seen incompatibility issues with CSS d...
Customer has a WS-C3750-48PS-E running 12.2(25)SED-IPSERVICES and a PIX515E running v7.04 OSA port on the switch is connected to a port on a PIX-4FE-66 contained within the PIX.2 other ports on the PIX-4FE-66 are connected to various other Cisco swit...
Hi there,Customer has asked:When an IPS 420 is switched off does it still pass traffic through the ethernet interfaces as straight through. He has seen this with other hardware and is wondering if this is the case withe the IPS's
Customer has a WS-C3524-PWR-XL running 12.0(5)WC13 and whilst connecting via the console they constantly see the following error message:01:28:00: Assert failure in ../src-l2-les-common/stp_les_shim.c line 1340We have searched on CCO but cannot find ...
"Customer is running VPN/Security Management Solution (VMS) 2.3 on Windows and Management Center for IDS Sensors . These manage 4240 IPS Sensors that have recently been upgraded fron running Cisco Intrusion Prevention System Release 4.x to v5.x. Cust...
The backup link is on a different router and the NAT takes place going inside. There is also a NAT pool configured which does seem to fail over when the main link fails but it is only the ip nat inside source static's which do not. Thankyou
The backup link is on a different router and the NAT takes place going inside. There is also a NAT pool configured which does seem to fail over when the main link fails but it is only the ip nat inside source static's which do not. Thankyou
