Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
We are facing a MAC flapping issue between WLC 2504 version 8.2.151.0 and flexconnect APs
The logs in the access switch connected to APs:
*May 4 21:59:16.369: %SW_MATM-4-MACFLAP_NOTIF: Host e094.6778.7b34 in vlan 255 is flapping between port...
Are the other SSID's also in use?
Only G-AIR (with dynamic VLAN attribution) and G-HOST (for guest users)
Are the other SSID's also set for flexconnect local switching?
yes, all of its
Did you enable the flex connect at AP level too?
yes, it is...
Hey Kundan,
In fact, it was working without any problem in local mode. But we change it to flexconnect to protect the network from being down when the controller is down.
The problem is happening only in the WLAN "G-HOST" which is for guests.
We don...
Hi Spooster
Vlan 255 is used for Wireless client traffic and the AP is configured for local authentication
Here is the mapping of VLANs in the AP
And this is the configuration of the WLAN
I get a similar error when running the sample android app of cisco provided here
01-01 00:34:49.010: E/AndroidRuntime(1769): FATAL EXCEPTION: main01-01 00:34:49.010: E/AndroidRuntime(1769): java.lang.RuntimeException: Unable to start activity Compon...