Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
OBJECTIVE:This is an example how to use the BGP RTBH feature in IPv4 and VPNv4 environment on Cisco IOS-XR based platform. This text briefly describes how this feature might be useful for Service Provider using Cisco IOS-XR based platform and how to ...
One of the frequently asked questions is how to monitor CPU utilization on RP, RSP, PRP and Line Cards on IOS-XR based devices using SNMP tools, like MRTG.Few easy steps described below will help to understand which OIDs have to be used for polling a...
Hi Nan,as far as i see it worksRP/0/RSP0/CPU0:kino#sh ip int brie | i MgMgmtEth0/RSP0/CPU0/0 10.48.32.19 Up Up RP/0/RSP0/CPU0:kino#sh inst ac sumDefault Profile: SDRs: Owner Active Packages: disk0:asr9k-m...
Hi Albert,Which XR release you are running?Becaue of the CSCtx92242 RESOLVE_VPLS_REFLECTION_FILTER_DROP_CNT are not counted as the part of the interface drops till 4.2.2So, if you are running anything below then 4.2.2 RESOLVE_VPLS_REFLECTION_FILTER_D...
Ji Albert,I would clear cpunters on interface and NP level and then capture again the outputssh inter tenGigE 0/0/0/6 show controllers np counters np7 location 0/0/CPU0 | i DROPsh controller tenGigE 0/0/0/6 all3-4 tmies in a row with about 1 minut...
Hello Phaifirst of all it would be really good if you can raise TAC sr tp record and torubleshoot the issueYou need to provide-the full console log-sh ver-admin show platformand dumpcore fileIt looks like you are having hte issue with flash and it i...
You are right and not right from one side you have 4 cards at the back and all of them are activefrom the other side you said there are 2 acrds and actually there are 4 of themand they are compartible with SIP-800 but they are not enoughIf you taake ...
