About MJ.Khaani

MJ.Khaani · 06-18-2016

Hi. I have problem with inter-vlan routing and pbr on Cisco switch 3750G. Previously i posted topic for this problem and it fixed for short time. I tried every possible solution that i know of, but nothing worked. Here is my network diagram. I have...

MJ.Khaani · 06-10-2016

Hi. I have Cisco 3750G with IP Service k9-mz.150-2.SE4 IOS. In my network i have 4 VLan with 4 internet gateways. I define 4 static route for each gateways and with PBR for matching this static routes. If i use "set ip next-hop" all the traffic goes ...

MJ.Khaani · 06-19-2016

Hi Thanks for reply. I think the acl that you add is no different from the last acl, both of them will match local traffic and send it to next hop.

MJ.Khaani · 06-19-2016

Hi Thanks for your documentation In your example (R5) you have two router one of them for inter-vlan routing(R1) and the next one used for pbr, but i have one L3 switch for pbr and inter-vlan routing.

MJ.Khaani · 06-18-2016

Hi this is final config

MJ.Khaani · 06-11-2016

Hi Carlos! Thanks for reply. SDM template must be on rounting to use PBR on VLAN. The first answer fixed my problem with InterVlan thanks to supportlan. MJ.Khaani

MJ.Khaani · 06-11-2016

Hi. Thanks for reply. I was applying PBR to SVIs, But without default next-hop all the traffic (InterVlan Routing) goes through the route-map and when i set next-hop with default i was unable to assigned with this error UNSUPPORTED_PBR-3 pbr can't be...

Member Since	‎06-10-2016 01:08 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	8

User Statistics

User Activity

Serious problem with PBR and Inter-VLAN routing

[SOLVED] Problem with PBR and InterVLAN routing

Hi

Hi

Hi this is final config

Hi Carlos!

Hi.