Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I would like to accomplish following task : I have some DMZ zone on ASA. It has access only to internet, not to inside network. This is network used for visitors.I would like to perform nat from inside subnet to DMZ and then from DMZ to outsi...
Hello Jouni,
I am experiencing similar problem. Multiple public subnets assigned by ISP via one cable. One is directly connected, second two are not directly connected nor assigned as secondary ip adress on inteface. Both subnets are configured on s...
I am running 9.1.2. I guess object nat is almost the same as command "nat (inside,DMZ) source dynamic 192.168.21.0/24 interface, isn't it? And, I tried that, does not work Looks like DMZ interface didn't know where to forward the traffic, so no NA...
Hello, I have the same /similar problem. I am trying to estalish GW-to-GW session. One GW hase direct public ip address assigned, the other is behind nat (of course ports are forwarded in-out to private ip address of second GW). I get the same log me...
Hello there,I am having the same issue as mike miller. Let me explain my problem. I set the passwords some time ago and they were working, but then we rolled back the ios to another version, because some eigrp failures has occured. So the IPS was not...
