About cy-harrild

cy-harrild · 10-20-2012

We're upgrading our Site A UCS from 2.0.2m to 2.0.4a but have encountered an intermittent error.Cluster Id: 0xaee77b42250911e0-0xb5bd000573abf004A: UP, PRIMARYB: UP, SUBORDINATEHA READYDetailed state of the device selected for HA storage:Chassis 1, s...

cy-harrild · 12-13-2011

We've got two sites each with it's own UCS.Site A - Fully operational - local data centre7 x b200 m2 - Oracle Enterprise Linux RAC 11g w/ RDBMS2 x b230 m1 - vSphere 5Site B - Build in progress - remote data centre7 x b200 m2 - Oracle Enterprise Linux...

cy-harrild · 10-20-2012

Also, while I think of it, NXOS 4.x is relatively old.Our MDS9148's, which are just over 12 months old, shipped with 5.0.1a. They all got upgraded to 5.2.2d in August this year.It would be worth checking the NXOS code version VS UCS code revision VS ...

cy-harrild · 10-20-2012

So it looks like npiv is enabled, 'feature npiv'.I see the VSAN is the same across both switches, unconventional but workable. Is the VSAN configured on all of the uplink ports of the UCS FI's (typically as a dual fabric VSAN) - there are two steps h...

cy-harrild · 10-20-2012

Are you sure the mac isn't in conflict, maybe there is a manual configured mac address outside of a pool that is conflicting?Question: have you got enough MAC addresses for the number of vNIC's in the service profile (this goes for WWNN/WWPN as well)...

cy-harrild · 10-20-2012

This may seem a bit academic at this point but why use LDAP against Active Directory, which requires a schema extension and heap of messing around, when RADIUS takes a whole lot less time to implement, ties policies to AD groups and can be made to se...

cy-harrild · 12-13-2011

Michael,Checked the whole storage thing, we had wound it down to have a single path (which had a single initiator and single storage target) in it, but had no effect. Basically we ran through all the lessons learnt while deploying Oracle Enterprise L...

Member Since	‎12-13-2011 02:10 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	7

User Statistics

User Activity

SEEPROM errors

vsphere 5 on b230

Re: B series hosts connected to MDS and SAN not showing up

Re: B series hosts connected to MDS and SAN not showing up

Re: cannot assign a service profile to a blade

UCS Manager and Active Directory integration

vsphere 5 on b230