Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 7 Building all within 600 feet on one another. I currently have a L2 network with routing (rip) in the core cat 6513 sup 720 catOS. I would like to make the move to iso and OSPF to MDF 3750 then uplinked to my 3560 with the access layer that a...
I Have 5 building with 3 IDF in each building, the client access range from 100 port to 200 ports 2950 or 2960 with 1 gig uplinks to 3560-g's. my core is two 6500sup720-3b. the bulk of my users are in 3 of the build with about 200 is my largest stack...
my core is 2 6500 cat OS 8.6.1 Im just starting VOIP I not able to set aux 3/1 vlan 107 on a trunk I can set it on a non trunk port.will my 802.1q cary traffice over the trunk Voice and data vlans. my IDF are cat 3560 ios I have no problems switchp...
How would you manage your vlans? if you do not use vtp with the segment(a 3650 with the 2950's or 2960's uplinked to it). In transparent mode? or Do you just use subnets and no vlans at all? I am the D'man with a 100 swiches or so. I do use ciscowork...
Thanks for your reply.You have confirmed what I was thinking of doing. I do have hsrp config with prempt on and primary and secondary root now. I'm planning on make the changes you have suggested. When I go L3 in each 3560, I will need to config vtp ...
Couple of questions:Do you route or switch from the distribution layer to the core? Routing in core, Layer2 in IDFHow many uplinks do you provide from the access layer to the distribution layer? 1 for each of 2950 or 2960 to 3560-g and 2 back to t...
