Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Cisco NAC is connected to the core switch. All the access switches are L2 connected to the core switch and to the clients.The user vlan is 101 and the access vlan is 11. The trusted and untrusted interface of Cisco Access server has same IP.NAC is...
The Cisco NAC is 3315 and software version is 4.1.2.Below are the error logs.[root@PLHO_CAS_01 ~]# cd /perfigo/common/bin/[root@PLHO_CAS_01 bin]# ./test_fips.sh infoInstalled FIPS card is nCipherInfo-FIPS file existsNFastApp_Connect failed: ServerNo...
see it directly asks for :he utility will now ask you a series of configuration questions.Please answer them carefully.Cisco Clean Access Server, (C) 2011 Cisco Systems, Inc.Configuring the network interfaces: Please enter the IP address for the inte...
the point is it is not asking for the same..see the attached capture during restart. i even used service perfigo config but it is not prompting for FIPS mode.
It is a new install. the device is Cisco NAC 3315 appliance. i havent used any external card reader. the device was working fine and i did the configuration and web console was also coming. then the device got rebooted and when the device got up thi...
