Hello all,
I'm having problems pinging from my data subnet (192.168.0.0/24) to my voice subnet (10.10.10.0/24). data subnet is connected to 0/1 and voice subnet to 0/2 on my ASA5510. I've tried adding static routes on each of the switches and enabl...
I'm hoping someone can please help me out.
I have an ASA 5510 connected to a 3560 PoE Switch and the switch has a Digium D40 IP Phone connected to it.
I have an IP address of 10.10.10.1 /24 on the Ethernet 0/2 where the switch is connected. The ...
Hi all,
I'm hoping someone can help me with a weird problem I have. I have three machines setup with TightVNC server listening on ports 5900, 5901 and 5902 with internal IP's of 192.168.0.100, .101 and .102 respectively. I have created both ACLs ...
Hi everyone,
I'm having a hard time understanding why my ASA shows I have the 3DES-AES encryption disabled. I have a security plus license on this device. Furthermore, I have already requested a free encryption license through the licensing portal....
Hello all,
At my work we currently have a single ASA 5512 in our HQ and we are using a pair of antennas as a wireless bridge to our branch site. The problem is the branch site is using the same subnet (192.168.0.0/24) as our HQ as you can see in Fi...
Hi all,
Thanks for your replies, been kinda busy lately but here is the current config of the ASA:
ciscoasa# sh run: Saved: : Serial Number: ********: Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz:ASA Version 9.1(7)16 !hostname c...
Hi Dennis good morning I just got into the office.
I definitely should've included that information!
Here are the results of the pinging tests:
Data Switch (192.168.0.2) to it's default gateway (192.168.0.1) OK!
Data Switch to 10.10.10.1 (Voic...
I added the following commands to the ASA:
object network DIGIUM_PHONE host 10.10.10.100object service SIPPORT service udp source eq sip object-group protocol TCPUDP protocol-object udp protocol-object tcpobject-group service SIP_PORTS tcp-udp port...
Thank you very much for your help. I ended up contacting them and they sent me an email with the correct activation key to enable 3DES-AES encryption. I can now enable SSH version 2 and i'm a happy camper!