Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone, this is my first posting here. We have uc560 which was installed back in 2011 and the cca does not have any built-in tools to view/edit the scripts. This device is EOL several times over, so no smartNet available but it served us well. W...
Trying to complete a site-to-site vpn but unable to get vpn connectivity between the dmz and remote site networksdmz (local network): 10.160.129.48 255.255.255.240 (2 ip addr being used 10.160.129.49, 10.160.129.50)remote (network): 10.120.0.0 255.25...
An ASA 5505 is setup at a client's contruction site to allow remote access to cameras thru port 6100. Client has single ip address associated with outside interface. Remote user can view site for approx 25secs, then connection drops and does not re-e...
I believe I got rid of that conflict. Thanks for pointing it out.The following results were obtained when I include the public ip address of our firewall. It seems that the crypto ACLs for the local network (dmz) is not being used - based on the ACL ...
Hey that's awesome! I've loaded up GNS3 but I was having difficulty getting the asa images loaded. So I abandoned that for the time. Or at least when I have more time.And yes..I know an update is way past due, but when you inherit an infrastructure a...
You know...sometimes you just can't win.....I need to be running at least v7.2(1) in order to use packet-tracer. I tried though...no luck This ASA 5510 is running:MTREXFW02(config)# sh verCisco Adaptive Security Appliance Software Version 7.0(8) Devi...
Thanks for quick response and comments..much appreciated.I did set some debug (this asa is running ver 7.0 (8). Below is the output. However this connectivity is only acheived when I use the following ACL:access-list rogers_apn extended permit ip hos...
