About Michael Schindler

Michael Schindler · 06-10-2015

I have 2 3750's stacked connected with 4 etherchannel trunk lines to a stack of 4 2960's. Show spanning-tree shows what I would expect. 1 of the etherchannels is forwarding and the other 3 are in the blocking state. As I dig deeper I have noticed:...

Michael Schindler · 04-30-2015

I have just taken over the administration of a network and I am trying to clean up a number of things. On the ASA's there are a number of objects created that when I right click on them and select "Where used" I get the message:"XXXXXXX is not used ...

Michael Schindler · 11-11-2015

I seem to be having difficulty with the ACL changes. The biggest difficulty is that they do not change. As an example I have an internal Remote Desktop Server that is accessed through our ASA in exactly the same way the web server is outlined in this...

Michael Schindler · 06-22-2015

The spanning tree configuration was a key factor in choosing what port to begin with. So just before I started I checked to make sure the core was the root. The etherchannel I was started with was in the blocking state, I wanted to make sure that i...

Michael Schindler · 06-22-2015

Ok Things are getting weirder. I mentioned earlier That I have been working with cisco on this as well. Their suggestion was to use LAcP on the cross stacked etherchannel links. This weekend I started changing the etherchannel inks to LAcP. I sta...

Michael Schindler · 06-17-2015

I may have misread your instructions LEO. I zeroed in on the word physical and unplugged the cables. Now rereading your directions I am pretty sure you wanted my to unbundle the physical ports from the etherchannel. For what it's worth I will atta...

Michael Schindler · 06-16-2015

Thanks to both of you. I am going to try Leo's suggestion first and I will post the before and after results of the show int trunk command.A little extra information. I am working with Cisco on a couple of things and they had me restart our core swi...

Member Since	‎12-06-2011 02:38 PM
Date Last Visited	‎09-17-2018 01:47 PM
Posts	8

User Statistics

User Activity

etherchannel showing a suspended port

Unused objects in my Firewall configuration

I seem to be having

The spanning tree

Ok Things are getting weirder

I may have misread your

Thanks to both of you. I am